ProtectaClear® is a practically invisible coating that will protect metal to keep it looking new

Stop tarnish, rust, smudges, fingerprints and water spots, even on mirror-polished surfaces.

ProtectaClear is a Tough Clear Coating

Practically invisible even on highly polished metal.
Extremely durable, providing scratch and abrasion resistance.
Formulated for use on non-painted, stainless steel, polished or plated metals. Copper, brass, silver, bronze, aluminum, alloys and more.
Highly resistant to corrosion. Prevents tarnish and oxidation from salt water, salt air, acid rain, etc.
Safe around food and skin-safe once cured
Makes metals hypoallergenic.
Guaranteed to not chip, crack, peel or yellow.
Indefinite shelf life in a closed container.
Dries quickly. No residual odor after just 1 hour.
One part coating – No mixing, no waste.
Self-leveling – No brush or applicator marks are visible if properly applied.
Self-annealing - easy to maintain or to remove and re-coat, even years later.

SHOP NOW

Explore ProtectaClear Projects

Jewelry | Sinks | Appliances | Grills | Countertops | High Touch Surfaces | Mirror Polished Metals

Aluminum | Brass | Bronze | Copper | Metal Clay | Silver | Stainless Steel | Plated Metals | Pewter | Zinc

Stainless steel appliances coated with ProtectaClear to stop fingerprints and smudges

Copper penny floor coated with ProtectaClear to stop further tarnish.

Hammered Copper Sink with designs is coated to preserve the patina and designs.

Tree of Life pendant wirewrapped is coated with Protectaclear to prevent fading and tarnish

Silver Tea Set coated to keep it shiny and prevent tarnish and fingerprints.

ProtectaClear is a tough, thin, clear protective coating that provides protection for metal from salt damage, tarnish, corrosion, and oxidation. ProtectaClear is scratch-resistant for metal that gets significant handling like railings, jewelry or other metal with high-touch or daily use. Once the crystal-clear coating is cured, it practically invisible, safe around foods, skin-safe, reduces the appearance of fingerprints and smudges on stainless steel, and protects copper and brass sinks, as well as copper counters from tarnish & water spots.

Any commercial coating can be scratched, however, ProtectaClear is tougher than most clear coats (H8) so the the cured coating is more scratch-resistant than other coatings. The self-annealing properties allow surfaces to be repaired without stripping the entire coating. ProtectaClear will blend to itself, resulting in a flawless finish.