Protect Goldwing Wheels from Brake Dust, Road Salts, Corrosion and Oxidation
Stop corrosion and oxidation on your Goldwing Wheels. Grime and dirt easily wash right off-even after 9000 miles.
Keep your GL wheels looking freshly polished and protected from Corrosion, Oxidation, Stains and Pitting.
​
Honda Goldwing wheels are especially difficult to keep clean because they are not coated. Some Goldwing owners wax their wheels once a month and some wax after every ride. What a chore!
​
Many Goldwing owners tend to neglect the wheels when cleaning the bike. The large amount of painted plastic panels (almost 40 on a GL1800 and more than 50 on a GL1500 Goldwing) means that most owners tend to clean the bodywork like they would a car and (apart from a cursory wipe with a rag) reserve little effort for the wheels. On the GL1800, the un-lacquered wheels need attention in order to keep white oxidation (from damp and water) and black spots (caused by brake dust) get a chance to settle in and cause damage.
​
Brake dust is highly corrosive and is the single most destructive contaminant that plagues your wheels. Road salts can also corrode and pit metal wheels.
​
Brake dust is a fine powder residue created from the brake rotor wearing away the brake lining. The pads contain carbon fibers, metal filings and an acidic adhesive. It is very sticky and collects in every nook and cranny of the wheel. If allowed to sit on your wheels, the highly corrosive brake dust can pit the metal.
​
Brake dust leaves gummy deposits that are hard to remove. Be wary of highly acidic cleaners because they can damage the finish on your wheels. When cleaning wheels, start with the least aggressive method of cleaning, soap and water. Once the wheels are clean, ProtectaClear® will keep them clean and looking freshly polished. Protect your wheels from corrosion and oxidation and keep them looking great with ProtectaClear®.
-
ProtectaClear® is NOT a wax but is a Tough, Clear Protective Coating that will protect your aluminum, chrome or alloy wheels from corrosion and oxidation. Seals and protects Stainless Steel and Anodized Aluminum too.
-
ProtectaClear® is crystal clear, is a one-part,self leveling coating that is easy to apply and is tough enough to keep your wheels looking great even if you drive through corrosive salts in the winter.
-
ProtectaClear® is easy to apply and can easily be removed for re-application. Paint it on, spray it on, wipe it on. Self Leveling. ProtectaClear® will blend to itself so re-coating is easy. The coating is not thick and plastic looking but makes the metal look like it is freshly polished.
We have had quite a few Honda Goldwing owners use ProtectaClear® to protect their wheels. Honda does not apply a protective clear coat and owners have a problem with corrosion and oxidation. Read about ProtectaClear® on an independent Goldwing forum.
